APD 12 E

APD 12 E

Description

Introduction


Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
Power (kVA) Mono-Phase,50 Hz, PF 1

 

VOLTAGE STANDBY RATING (ESP) PRIME RATING (PRP) Standby Amper
 kW  kVA  kW kVA
400/230  9.6 12  8.6 11 17

 

STANDBY RATING (ESP) Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utilitysource. ESP is in accordance with ISO 8528. Overload is not allowed.

PRIME RATING (PRP) Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528. 10 %overload capability is available for a period of 1 hour within 12-hour perod of operation,in accordance with ISO 3046.

 

General Characteristics

Model Name APD 12 E
Frequency (Hz)
50
Fuel Type
Diesel
 Engine Made and Model
AKSA A2CRX08
 Alternator Made and Model
Mecc Alte
 Control Panel Model
P4520
 Canopy
AK 01
Manufacturer reserves the right to make changes in the model, technical specifications, color, equipment, accessories and images without prior notice.
(11.05.2017)
ENGINE SPECIFICATIONS
Engine
AKSA
Engine Model
A2CRX08
Number of Cylinder (L)
2 cylinders – in line
 Bore (mm.)
80
 Stroke (mm.)
79
 Displacement (lt.)
0.794
 Aspiration
Naturally Aspirated
 Compression Ratio
23:1
 RPM (d/dk)
3000
 Fuel Type
Diesel
 Governor System
Electronic
 Oil Capacity (lt.)
2.3
 Coolant Capacity (lt)
6.4
Cooling Fan Air Flow (m³/min.)
1
 Radiator Air Flow (m³/min.)
48
 Exhaust Gas Flow (m³/min.)
2.07
 Exhaust Gas Temperature(°C)
500
 Operating Voltage (Vdc)
12 Vdc
 Fuel Cons. Prime With %100 Load (lt/hr)
4

 

ALTERNATOR CHARACTERISTICS
 Manufacturer
Mecc Alte
 Frequency (Hz)
50
 Power (kVA)
10
 Design
With Brush, 2 Pole
 Rated Power Factor
0.8
 Phase
3
 VOLTAGE (V)
400/230
 Insulation System
H
Manufacturer reserves the right to make changes in the model, technical specifications, color, equipment, accessories and images without prior notice.
(11.05.2017)
Gen.Set Canopy Dimensions (mm)
 MODEL
 AK 01
 LENGHT
1152
 WIDTH
776
HEIGHT
 890
 DRY WEIGHT (kg.)
270
 TANK CAPACITY (lt.)
15
1. Steel structures.
2. Emergency stop push button.
3. Control panel
4. Corrosion-resistant locks and hinges.
5. Oil could be drained via valve and a hose
6. Exhaust system in the canopy.
7. Special large access doors for easy maintanance
8. Base frame -fuel tank.
9. Lifting Points.
10. Cover for radiator water filling

INTRODUCTION


Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirementsand provide optimum protection from inclement weather and development by our specialist acoustic engineers. Ourmodular designed sound insulated canopies (8 – 275kVA) fit directly to the open generator set to provide ease of access forservicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed tooptimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

Control Panel

Control Module DSE
 Control Module Model  P4520
1. Main Status Display.
2. Menu Navigation Buttons.
3. Automatic Location.
4. Manual Start Button.
5. Reset/Stop Button.

Devices


-DSE, model 4520 Auto Mains Failure control module.
-Battery charger.
-Emergency stop push button and fuses for control circuits

 

Manufacturer reserves the right to make changes in the model, technical specifications, color, equipment, accessories and images without prior notice.
(11.05.2017)
CONSTRUCTION and FINISH

-Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
 
INSTALLATION

Control panel is mounted on canopy with steel stand. Located at the back side of the generator set (When you look atthe Gen.Set. from Alternator)
  
GENERATING SET CONTROL UNIT

The DSE P4520 is a standard control module for APD 12E and ıt has been designed to start andstop diesel and gas generator sets.
The DSE4520 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault
  
Standard Specification

-Microprocessor controlled.
-LCD display makes information easy to read.
-4-line, 64 x 132 pixel display.
-Automatically transfers between mains (utilty) and generator power.
-Manual programming on front panel.
-User-friendly set-up and button layout.
-Remote start.
-Event logging (5)showing date and time.
 
Instruments

ENGINE
 -Engine speed.
 -Oil pressure.
 -Coolant temperature.
 -Run time.
 -Battery volts.
 -Configurable timing.
GENERATOR
 -Voltage (L-L, L-N).
-Current (L1-L2-L3).
 -Frequency. MAINS
 -Voltage (L-L, L-N).
 -Frequency.
 -Mains ready.
 -Mains enabled.
 -Gen. Set ready.
 -Gen. Set enabled
WARNING
-Charge failure.
-Battery Low/High voltage.
-Fail to stop.
-Low /High generator voltage.
-Under/over generator frequency.
-Over /Under speed
 Standards
 Elecrical Safety / EMC compatibility
-BS EN 60950 Electrical business equipment.
 -BS EN 61000-6-2 EMC immunity standard.
 -BS EN 61000-6-4 EMC emission standard
Elecrical Safety / EMC compatibility
-Mains ready.
-BS EN 60950 Electrical business equipment.
-Mains enabled.
-BS EN 61000-6-2 EMC immunity standard.
-Gen. Set ready.
-BS EN 61000-6-4 EMC emission standard
-Gen. Set enabled.

Manufacturer reserves the right to make changes in the model, technical specifications, color, equipment, accessories and images without prior notice.
(11.05.2017)

 


STATIC BATTERY CHARGER

– Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
Battery charger models’ output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 24
V for 24 V . Input 198 – 264 volt AC.
Proline DC12V charger has high efficiency, long life, low failure rate, light weight and low heat radiated in accordance
with linear alternatives.

Additional information

MODEL

APG 80

STANDBY POWER (KW/HP)

KVA: 80,00
KW: 64,00

PRIME POWER (KW/HP)

KVA: 0,00
KW: 0,00

HZ

50

ENGINE

GM NG